What is the double-sided tape made of?

Double-sided adhesive tape is a roll-shaped adhesive tape made of paper, cloth, and plastic film as the base material, and then uniformly coating the elastomer pressure-sensitive adhesive or resin pressure-sensitive adhesive on the above base material. Adhesive, release paper (film) or silicone oil paper is composed of three parts.

1. Tools

Such tools are easy to find:

  • 1. A hair dryer. This is an important tool as well as the core tool in the whole method, but it should be noted that the hair dryer we use is for heating, so we must be able to blow hotter air, ordinary hair dryers may not work, the older the better .

  • 2. A blade. Ordinary utility knives can be used, but be careful not to use the handle. You may have to use a razor blade on special occasions.

  • 3. Be careful. To do this kind of work is actually very simple, but the important thing is that you must be careful to succeed.

double-sided tape

2. Occasion

This method has been tested and applied to the following situations:

  • 1. Self-adhesive tape on the smooth paper packing box;

  • 2. Self-adhesive tape on the natural pulp paper packaging box;

  • 3. Vulnerable labels often found in things such as computer accessories or mobile phones;

  • 4. After uncovering, there will be various anti-counterfeiting labels left by some characters composed of glue;

  • 5. Self-adhesive tape or sticker stuck on a thin plastic film;

3. Specific method

  • 1. For this kind of situation, it is easy to handle, scrape the beginning with a blade and slowly tear it off by hand. If the speed is too slow, use a hair dryer to heat it slightly.

  • 2. This situation is more difficult to deal with, especially the kind with patterns printed on the tape.

    Use a hairdryer to heat it up to a weak windshield. Use a blade to scrape the opening and heat the back of the tape. Be careful not to overheat it, which will deform the tape.

    Slowly tear off with your hands, be careful throughout the process. The patterned tape will leave a trace more or less. Be careful not to overheat it, otherwise, more will remain.

    A little trick: the faster you uncover, the less the residue, but the easier it is to tear the carton.

    The specific effect may be related to many aspects, but as long as you are proficient, it is still satisfactory in most cases. It will not be easy to find when you seal it again without checking it carefully.

  • 3. In this case, you can directly use a blade to scrape off slowly. In some cases, a thinner blade may be required. In this case, a razor blade can be used. If the label is large, use a hair dryer to assist heating.

  • 4. This kind of label is generally small. You can gently pick the corners with a blade, heat it with a hairdryer, and slowly pick up the entire label. When handling this kind of label, you must be careful and then careful. If you are not careful, there will be residual traces and you will not succeed.

  • 5. There are tricks to deal with this. Normal heating is definitely not good, because the plastic film will also be blown and deformed. The method is simple: tear it off with your hands directly, not slowly, but fast. If the label is large, you can divide it several times, suddenly and quickly. To deal with this situation, the lower the ambient temperature, the better.